schedule a consultation 
Round
Oval
Rectangle
Description
54″ TRADEWINDS RESIN SALT POOL
Our TRADEWIND stands with a 54’’ high pool wall . The design is made with all of the bells and whistles known in the industry.
The skeleton of the pool is made with all resin parts: a resin rim, which serves as the foundation for the pool walls, resin uprights that support the pool wall on the sides, and a thick 8’’ resin top supporting topseat.
WARRANTY
One of the longest warrantied pools in the industry!
ADVANCED COMPUTER AIDED DESIGN.
Combined with leading edge gas assist injection molding technology allow for the parts to fit perfectly.
MULTITUDE OF FEATURES.
Our TRADEWINDS Pool has a special blend of UV inhibitors in order to postpone and reduce fading from the sun.
Our TRADEWINDS Pool has a robust injection-molded resin structure, walls finished with Zuratex 3000 corrosion coatings. All walls are protected against humidity and chemicals. Pool features all resin connecting plates. Precision-adjusted components.
ADD A PRE FILTER SKIMMER SYSTEM FOR $199.99!
No pool should be without this patent pending system. Our Pre-Filter system captures up to 80% of all dirt and organic matter. Now you can have your water pre-filtered before it reaches the pump and filter system. Reduces the amount of dirt going into your filter system and dramatically increases the length of the filter cycle.
MODEL #BS-202PSN
UP GRADE TO A MOLECULAR WELDED LINER FOR $59.90!
Manufactured by using a high-frequency molecular welds in its fabrication produces a seal that is stronger then the material itself!
High-Frequency Welds are normally only used for custom in-
ground liners costing thousands of dollars!
With the introduction of molecular welding of plastic products, more laser energy will be delivered to the sheeting that makes up the liner and will translate into a superior seam.
Because of the relative newness and cost of this new process, there are only a limited number of manufactures that are using this new technology, its use is mainly focused in the automotive and aircraft industries.
Wall color may vary at time of shipment. Wall bolts are not stainless steel.
ASSEMBLY
Is quick and easy! Everything you need comes in one complete shipment to you. Why not make a great family weekend project! Prepare the ground, assemble the frame and liner and its that easy.
RESIN CONSTRUCTION!
All components of the resin pool structure are molded by an injection process that enables reinforcing for every component(ribbing process), to curve the top set and also, to use our sturdy snap-in-place system that eliminates hardware. All resin components are colorfast throughout.
STAINLESS STEEL FRAMING HARDWARE.
High grade stainless steel nuts, bolts and fasteners are used with this pool, eliminating the worry of rust spots on your pool.
Stainless hardware has a higher tensile strength then the normal hardware that is supplied with most pools.
Stainless steel is stronger and it will hold up to harsh corrosive environments and will also hold up in place with very high or low temperatures.
RESIN COMPONENTS.
One of the benefits of resin construction is a non-corroding product. Since there are no extra coatings applied to the resin, you will not have pool parts cracking, chipping or complete parts failure.
Our TRADEWINDS Pools have U.V. inhibitors imbedded in the resin providing additional protection against the elements.
RESIN TOP AND BOTTOM TRACK UPGRADE INCLUDED!
One great option you have with your TRADEWINDS pool is the upgraded top and bottom track to All Resin.
Bottom rails are very prone to rust if metal, because they are constantly exposed to the minerals and elements in your soil.
Without rims your pool wall could bow out or you could have a complete wall failure.
Resin bottom track will provide your pool with an excellent foundation to erect your swimming pool. This is the most common part that is replaced on older pools.
Pool supplied with a 20 mil winterized blue overlap liner.
GALFAN COATING PROTECTION
Walls are all finished with a GALFAN finish. GALFAN is a metal based material that is used in heavy-duty industries, like the automobile industry. It stands up to the regular wear and tear with a unique balance of malleability and sturdiness.
GALFAN coating feature excellent corrosion resistance. GALFAN coating is produced on both-sided in a continuous hot-dip coating process, it provides corrosion protection for areas of exposed areas, and offers full corrosion protection because of it’s low-friction and tightly bonded coating.
Hardness of GALFAN coating that is composed of 95% zinc and 5% aluminum, has a eutectic structure leading it excellent ductility and thin intermetallic layer at the coating interface guarantees excellent coating adhesion.
GALFAN was developed around 1980 at the Centre de Recherche’s Metallurgies (CRM) in Belgium under the sponsorship of The International Lead Zinc research Organization (ILZRO)
<
