2021 12’x20’X54″ Battleship Hybrid SEMI INGROUND Pool SHIPPING NOW OR PLACE IN LAY A WAY

Description

BATTLESHIP SEMI INGROUND POOL

IN STOCK!

BUILT TO LAST. Whether you want an above-ground pool or an in-ground look, our BATTLESHIP SEMI is the answer. And at a very attractive price, this pool offers exciting features and benefits designed to provide years of pool enjoyment.

SPECIFICATIONS. Beautifully crafted 7 “Resin” top rails and large 7″ steel verticals. Manufactured for maximum durability, chemical resistance, and protection against solar rays.

STAR GALFIN GALVANIZATION PROTECTION. All steel parts of the BATTLESHIP are protected by the Star Galfin® process. A proprietary combination of zinc and aluminum coats all steel parts to give them superior corrosion resistance when compared to other similarly priced pools. This pool will not chip, fade, rust or peel and is designed to look as good ten years from now as it does today.

WALLS. Made from heavier copper bearing steel then industry standards for a stronger pool wall. BATTLESHIP walls are heavier than most other brands. Walls also have a special Poly-Lam™ coating and a baked-enamel finish.

SEMI OR FULLY IN GROUND. When other manufactures void the warranty with any more then a few inches of soil up against the pool, BATTLESHIP by THE MAKERS OF DOUGHBOY does not! Put the pool on the ground, into a hillside, partially or fully in-ground and your warranty remains the same.

TRU-LOCK™ WALL CLOSURE. This system offers a newly-designed fastening system for maximum strength, greater wall stability, and faster, easier assembly.

WALL CORRUGATION. Deep and balanced corrugation offers wall flexibility and vertical strength. BATTLESHIP pool walls have MORE corrugation per inch then most other brand.

TRIMLINE SPACE SAVER™ OVAL

SUPPORT SYSTEM. Pool features an easy-to-install, one-part design which provides a stronger installation and a more attractive appearance. Allows larger pools to fit into smaller backyard settings.

VERTICALS & TOP RAILS. One of the strongest resin verticals and uprights on the market today , constructed for extra strength and rigidity

QUALITY FEATURES. Pre-punched skimmer and return openings to eliminate sharp edges that could cut the liner during installation. From blazing sunlight to driving rain and snow, your pool will look virtually brand new for years to come. Pool supplied with a standard overlap blue winterized liner, Lomart and Doughboy Liners sold at an additional cost.

POOL PRODUCED BY THE SAME PEOPLE WHO MANUFACTURE LOMART AND DOUGHBOY POOLS!

UPGRADE TO A LOMART WHISPERING WIND WITH BUILT IN STEP

ORDER NOW, PRICING WILL BE 50% HIGHER FOR 2022~

ASK YOUR SALESPERSON FOR DETAILS AND PRICING!

Here are a few things to remember about burying the pool to up to a 24″deep Installation>

Any HII pools approved to be buried up to 24” while backfilling with dirt, must have a proper water diversion plan put in place. Water diversion plan means that ALL water, both topical and ground water are diverted away from the pool at all times. Any depth over the 24” requires the use of our “Below Grade Instructions” complete with the slurry mixture as described per instruction booklet. Pool collapse due to improper burial or unstable soil conditions is not covered under warranty. If there is any question regarding the stability of the soil to be used as backfill, HII’s Below Grade Instructions should be followed closely. Customer assumes all responsibility for proper installation.

Here are a few things to remember about Below Grade Installations>

1.) Any concrete decking MUST set directly onto the slurry mix. DO NOT place any sand base between concrete decking and slurry mix.

2.) Over dig should be 18″ wide

3.) Per instructions, top of slurry is 9″ below the top of the Top Rail

4.) Per Instructions, install drainage to divert any water (topical or ground water) away from pool. There should be NO way for water to build up around the outside of the pool.

5.) Slurry mix / If ordering from outside company, the slurry should be #3 slump (moisture) which will look VERY DRY. The slurry cannot be wet as it would be if you were installing a driveway or side walk or the slurry will push in the pool wall. Install the the #3 slump slurry in layers all the way around the pool. You must monitor the pool wall closely during the entire backfilling process to verify that the pool wall dose not indent. (Review the instructions carefully regarding backfilling)

6.) Do not use manufactured pool cove (where floor and pool wall meet) when recessing a pool into the ground. Use earth cove only.

7.) NEVER “BUILD UP” THE GROUND WHERE THE POOL IS TO BE INSTALLED. YOU MUST ALWAYS INSTALL THE ENTIRE POOL ON UNDISTURBED EARTH.

CLICK LINK BELOW FOR BELOW GRADE INSTALLATION>

573-3491 HII BelowGrade Revised

UPGRADE TO A DOUGHBOY LINER

LINER EXCLUSIVES. The only above-ground pool manufacturer that produces virgin-vinyl liner material made to original Doughboy specifications. Liners are available in a variety of decorative pattern. Pool supplied with a standard flat liner, doughboy liner can be purchased at an additional charge.

EXCLUSIVE THERMA-SEAL™. This proprietary fusion method provides superior sealing for maximum durability and quality. Unmatched in the industry. Doughboy is so confident with this process that they offer a 100% lifetime warranty on the seams of all liners.

EXCLUSIVE 20 & 25 MIL EXPANDABLE LINERS. These liners are designed to expand smoothly into an Optional Special-Purpose Deep Swimming Area for underwater swimming only. Please never jump or dive into any pool.

DOUGHBOY LINER IS AT AN ADDITIONAL PRICE DETERMINED BY TYPE AND SIZE OF POOL ASK SALESPERSON FOR DETAILS.

We Ship Anywhere In The USA!

No One Can Beat Our Prices!

2021 12’x20’X54″ Battleship Hybrid SEMI INGROUND Pool SHIPPING NOW OR PLACE IN LAY A WAY