Spa Essentials pH Increaser 1.5 lbs $8.99


pH Up is used to raise the pH in hot tub and spa water. The water in your spa should be maintained at a pH of 7.2-7.8 ppm (parts per million) and the total alkalinity should be maintained at a level of 80-140 ppm.

Test spa water frequently with a suitable spa water test kit to ensure proper pH is maintained. Spa pH Increaser is compatible with all sanitizers including bromine, chlorine and biguanide.

pH Up Directions for Use

pH Up should be used if pH is below 7.2.

  1. Turn on air blower, jets, or filter system.
  2. Add one ounce of pH Up for every 100 gallons of spa water.
  3. Retest spa water after 30 minutes.
  4. Follow steps 1-3 until the pH and total alkalinity are in the range of 7.2-7.8 and 80-140 ppm respectively.

Note: Always wait 30 minutes between doses and test water before each addition of pH Up.

Omni SPA Essentials

This website claims no credit for any images posted on this site unless otherwise noted. Images on this website are copyright to its respectful owners. If there is an images appearing on this website that belongs to you and do not wish for it to appear of this site, please e-mail with a link to said image and it will be promptly removed.