With PristineBlue® in your spa, you can relax with the knowledge that the water is being treated without the irritating effects of chlorine or bromine.
Water treated with PristineBlue® feels softer and looks inviting without a chemical taste or odor. It’s gentle to equipment, won’t foam, won’t bleach your swimsuit and you won’t believe how good your skin will feel after a relaxing soak.
You can relax knowing that you don’t have to constantly test your water and adjust the chemical levels…Just once every 2 weeks does the trick.
Be sure you know the volume of your spa in gallons. Your spa dealer can help you calculate the volume and assist you with all aspects of spa ownership. They can analyze your water and recommend products and their phone number should be the first one you dial when you have a question.
Start Up on PristineBlue®
Drain the spa and refill. Replace or clean the filter thoroughly.
Balance the water.
Total Alkalinity: 50 to 90 ppm
pH: 7.2 to 7.6
Calcium Hardness: 100 to 300 ppm
Add 10 milliliters of PristineCheck® per 100 gallons of water. Circulate for 2 to 4 hours.
Shock with 5 milliliters (or 1 teaspoon) of PristineExtra® per 100 gallons of water. Circulate for 2 to 4 hours.
Clean the filter.
Add 6 milliliters of PristineBlue® per 100 gallons of water. Run the filter for 1 hour.
After each use of the spa, shock with 5 milliliters (or 1 teaspoon) of PristinePower® per 100 gallons of water, not to exceed once per day. (Make sure to have the jets on, and run them about 10 to 15 minutes, so the PristinePower® will not just drop to the bottom.)
Every 2 Weeks
Balance the water.Total Alkalinity: 50 to 90 ppm pH: 7.2 to 7.6 Calcium Hardness: 100 to 300 ppm
Test the PristineBlue® level and add according to the Spa Dosage Chart.
Add 1 milliliter of PristineClean® per 100 gallons of water.
Add 1 milliliter of PristineClear® per 100 gallons of water.
Add 5 milliliters (or 1 teaspoon) of PristinePower® per 100 gallons of water.
Filter for 4 to 6 hours and then clean the filter media.
Hints and Tips
Use these helpful ideas to operate your spa safely, efficiently and economically.
Always shower before using the spa. Lotions, body oil, sweat, etc. may cloud the water and shorten the life of the filter.
Dry the spa surface before replacing the cover. This will prevent odor and lengthen the life of the cover. Remember to use PristineMist™ every 4 to 6 weeks.
Do not use household cleaners on the spa.
Do not use the spa under the influence of alcohol, narcotics or other drugs that can cause drowsiness.
If you are pregnant, consult your physician before using the spa.
PristineBlue® should not be stored below 32˚ Fahrenheit.